|
需要修改位置：(1)/linux-2.6/arch/mips/rt2880/Kconfig(2)/linux-2.6/drivers/mtd/maps/ralink-flash.h(3)/linux-2.6/drivers/mtd/maps/ralink-spi.c(4)/vendors/Ralink/RT5350/config/4M_32M_config.linux-2.6(make dep 后生成的config.h)(1)添加menuconfig中选项choiceprompt "Flash Size"default RT2880_FLASH_4Mconfig T2880_FLASH_2M bool "2M"config RT2880_FLASH_4M bool "4M"config RT2880_FLASH_8M bool "8M"config RT2880_FLASH_16M bool "16M"config RT2880_FLASH_32M bool "32M"#select RT2880_FLASH_32Mendchoice#Data分区#注释部分不无效choiceprompt "Flash Data Size"default RT2880_FLASH_DATA_320KBconfig RT2880_FLASH_DATA_0KB bool "none(0)KB"#config RT2880_FLASH_DATA_64KB# bool "0x10000(64)KB"#config RT2880_FLASH_DATA_128KB# bool "0x20000(128)KB"#config RT2880_FLASH_DATA_192KB# bool "0x30000(192)KB"#config RT2880_FLASH_DATA_256KB# bool "0x40000(256)KB"config RT2880_FLASH_DATA_320KB bool "0x50000(320)KB"config RT2880_FLASH_DATA_384KB bool "0x60000(384)KB"endchoiceconfig MTD_PHYSMAP_DATA_LEN hex default 0x0 if RT2880_FLASH_DATA_0KB default 0x10000 if RT2880_FLASH_DATA_64KB default 0x20000 if RT2880_FLASH_DATA_128KB default 0x30000 if RT2880_FLASH_DATA_192KB default 0x40000 if RT2880_FLASH_DATA_256KB default 0x50000 if RT2880_FLASH_DATA_320KB default 0x60000 if RT2880_FLASH_DATA_384KBchoice (2)添加data分区大小，修改kernel分区大小。#if defined (CONFIG_RT2880_FLASH_32M)#define MTD_BOOT_PART_SIZE0x40000#defineMTD_CONFIG_PART_SIZE0x20000#defineMTD_FACTORY_PART_SIZE0x20000#define MTD_DATA_PAPT_SIZE CONFIG_MTD_PHYSMAP_DATA_LEN/**/#else#if defined (RECONFIG_PARTITION_SIZE)#if !defined (MTD_BOOT_PART_SIZE)#error "Please define MTD_BOOT_PART_SIZE"#endif#if !defined (MTD_CONFIG_PART_SIZE)#error "Please define MTD_CONFIG_PART_SIZE"#endif#if !defined (MTD_FACTORY_PART_SIZE)#error "Please define MTD_FACTORY_PART_SIZE"#endif#else#define MTD_BOOT_PART_SIZE0x30000#defineMTD_CONFIG_PART_SIZE0x10000#defineMTD_FACTORY_PART_SIZE0x10000#define MTD_DATA_PAPT_SIZE CONFIG_MTD_PHYSMAP_DATA_LEN<span style="font-family: Arial, Helvetica, sans-serif;">/*添加data分区长度*/</span>#endif#endif#ifdef CONFIG_RT2880_ROOTFS_IN_FLASH#ifdef CONFIG_ROOTFS_IN_FLASH_NO_PADDING#define CONFIG_MTD_KERNEL_PART_SIZ 0#endif#define MTD_ROOTFS_PART_SIZEIMAGE1_SIZE - (MTD_BOOT_PART_SIZE + MTD_CONFIG_PART_SIZE + MTD_FACTORY_PART_SIZE + CONFIG_MTD_KERNEL_PART_SIZ + MTD_DATA_PAPT_SIZE)#defineMTD_KERN_PART_SIZECONFIG_MTD_KERNEL_PART_SIZ//#defineMTD_KERN_PART_SIZE0x310000#else //CONFIG_RT2880_ROOTFS_IN_ROM#define MTD_KERN_PART_SIZEIMAGE1_SIZE - (MTD_BOOT_PART_SIZE + MTD_CONFIG_PART_SIZE + MTD_FACTORY_PART_SIZE + MTD_DATA_PAPT_SIZE)/*计算除去data分区长度后内存分区长度*///#defineMTD_KERN_PART_SIZE0x310000#endif(3)定义data分区static struct mtd_partition rt2880_partitions[] = {{ name: "ALL", size: MTDPART_SIZ_FULL, offset: 0, },/* Put your own partition definitions here */ { name: "Bootloader", size: MTD_BOOT_PART_SIZE, offset: 0, }, { name: "Config", size: MTD_CONFIG_PART_SIZE, offset: MTDPART_OFS_APPEND }, { name: "Factory", size: MTD_FACTORY_PART_SIZE, offset: MTDPART_OFS_APPEND#ifdef CONFIG_RT2880_ROOTFS_IN_FLASH }, { name: "Kernel", size: MTD_KERN_PART_SIZE, offset: MTDPART_OFS_APPEND, }, { name: "RootFS", size: MTD_ROOTFS_PART_SIZE, offset: MTDPART_OFS_APPEND, #ifdef CONFIG_ROOTFS_IN_FLASH_NO_PADDING }, { name: "Kernel_RootFS", size: MTD_KERN_PART_SIZE + MTD_ROOTFS_PART_SIZE, offset: MTD_BOOT_PART_SIZE + MTD_CONFIG_PART_SIZE + MTD_FACTORY_PART_SIZE, #endif#else //CONFIG_RT2880_ROOTFS_IN_RAM }, { name: "Kernel", size: MTD_KERN_PART_SIZE, offset: MTDPART_OFS_APPEND,#endif//CONFIG_RT2880_ROOTFS_IN_FLASH#ifdef CONFIG_DUAL_IMAGE }, { name: "Kernel2", size: MTD_KERN2_PART_SIZE, offset: MTD_KERN2_PART_OFFSET, #ifdef CONFIG_RT2880_ROOTFS_IN_FLASH }, { name: "RootFS2", size: MTD_ROOTFS2_PART_SIZE, offset: MTD_ROOTFS2_PART_OFFSET, #endif#endif//CONFIG_DUAL_IMAGE/*DATA分区添加部分*/}, {name:"Date", /* mtdblock5 */size:MTD_DATA_PAPT_SIZE, offset: MTDPART_OFS_APPEND,/*偏移量，data开头位置*/ }};
(以上内容不代表本站观点。) --------------------------------- |
本網站是"非商業"(non-commercial)。
